This video takes you on a tour of a Vic­to­ri­an bob­bin mill at Stott Park, near Lake Win­der­mere, in the Lake Dis­trict, Cumbria.

Tour of a Vic­to­ri­an Bob­bin Mill, Stott Park, Cum­bria from Richard Elen on Vimeo.

Enor­mous cog­wheels at Stott Park bob­bin mill

Stott Park Bob­bin Mill was opened in 1835 to sup­ply the cot­ton mills of Lan­cashire (of which this area was a part at the time) with bob­bins to car­ry the thread which was spun into cloth. It was orig­i­nal­ly pow­ered by a water wheel, lat­er by a water tur­bine and then by a steam engine. Ulti­mate­ly, elec­tric­i­ty arrived. The mill final­ly closed in 1971 and then reopened in 1983 as a museum.

Exte­ri­or view of the build­ing show­ing the end of the line shaft and a belt drive

Today, Stott Park Bob­bin Mill is in the care of Eng­lish Her­itage, and in this video you’ll be tak­en on a 20-minute guid­ed tour of the mill by one of the Eng­lish Her­itage staff mem­bers to see the dif­fer­ent stages of the bob­bin-mak­ing process, includ­ing some of the machines being used by a vet­er­an mill worker.

You’ll see the steam engine, although it was not, regret­tably, in steam on this occa­sion, and get a feel­ing for what life was like for the mill work­ers – who, in this case, came main­ly from the work­hous­es of Liv­er­pool and Manchester.

View through the win­dow in the pre­vi­ous pic­ture into part of the build­ing show­ing some of the machines and the belts lead­ing up to the over­head line shaft

For many years, the man­ag­er of this mill was a woman, and curi­ous­ly she only had male work­ers in the mill; gen­er­al­ly mills of this type were oper­at­ed by women, who were wide­ly believed to be bet­ter at the job.

I am grate­ful to the staff at Stott Park and to Eng­lish Her­itage for pro­vid­ing the tour depict­ed in this video.

This video is part of an ongo­ing series intend­ed to give an insight into Britain’s ear­ly indus­tri­al technology.

The oth­er week­end I had the great oppor­tu­ni­ty to vis­it the Beamish open-air muse­um in Coun­ty Durham. I was stay­ing with friends near Sun­der­land for the week­end and their sug­ges­tion that we went there was a very good one. I can hearti­ly rec­om­mend the muse­um to any­one inter­est­ed in our indus­tri­al his­to­ry – and par­tic­u­lar­ly that of North­ern England.

Not only that, the Muse­um is cur­rent­ly offer­ing a spe­cial deal where for £16 you get a year’s admis­sion. Well, it’s worth that for just one vis­it – you need to allo­cate an entire day to the site (and still you won’t get round it all).

Both my friends have been involved with Beamish over the years and as a result they knew all the cool places to go. There are quite a few build­ings and oth­er items on-site, each hav­ing been painstak­ing­ly dis­man­tled, brought to the site, and rebuilt.

The cen­tre­piece, I sup­pose, is a rebuilt town street, set in 1913, with a ter­race of hous­es (includ­ing an ear­ly 20th cen­tu­ry den­tist, a pianoforte teacher’s house and much more) and shops includ­ing a Co-Op, a sweet shop with sweet­ies made on the premis­es, a garage, a bank, and the most recent addi­tion, a Mason­ic Hall with a com­pre­hen­sive dis­play of arte­facts and regalia. There’s also an excel­lent cafeteria!

There’s also a Wag­gonway, set in 1825, where you can trav­el for a few hun­dred yards behind a repli­ca ear­ly steam loco­mo­tive (see below); a Col­liery Vil­lage cir­ca 1913 and an old Manor on the hill. The dif­fer­ent areas are linked by peri­od bus­es and trams.

The peri­od cov­ered is broad­ly Victorian/Edwardian, but some loca­tions (such as the Wag­gonway and the Manor, which are set in 1825) are set in ear­li­er peri­ods. Every­where there are staff mem­bers (in cos­tume) who will tell you about the old prac­tices and explain what you’re see­ing. I real­ly could­n’t fault them.

This is a real­ly tremen­dous place to vis­it and I can’t rec­om­mend it enough – I’ll be back as soon as I can.

I took some video while I was there and present them below. All three items are hand-held so I’m afraid they are a lit­tle wob­bly at times, but hope­ful­ly they will give you a feel for some aspects of the place.

This first one is of the Pock­er­ley Wag­gonway, where we trav­elled for a short dis­tance behind the “Steam Ele­phant”, an ear­ly steam loco­mo­tive. We see the jour­ney from an open coach and also from the track-side, and the trip is pre­ced­ed by some back­ground from a staff member.

Pock­er­ley Wag­gonway at Beamish Muse­um from Richard Elen on Vimeo.

The sec­ond item is also from the Wag­gonway area: it’s a demon­stra­tion of a tra­di­tion­al Pole Lathe, used by a “bodger” to make things like table and chair legs and oth­er items that could be turned from wood. The oper­a­tor, William Slas­sor, describes its prin­ci­ples, oper­a­tion, and how it was used.

Pole Lathe at Beamish Muse­um from Richard Elen on Vimeo.

And final­ly, a short video of a gen­tle­man play­ing a Ger­man ‘Har­moni­pan’ street organ in the main street of the recon­struct­ed town.

The instru­ment is hand-cranked, and turn­ing the han­dle both oper­ates the bel­lows that enable the pipes to sound; it also draws a roll of punched paper tape about 2in wide across a what we might call a “read­er”, con­sist­ing of a row of holes, each con­nect­ed to a pipe. The bel­lows pass air to the read­er, and where there is a hole in the tape, air pass­es through and off to the cor­re­spond­ing pipe.

The music is a med­ley of Amer­i­can tunes, and ends with quite a flour­ish. I was­n’t able to cap­ture the very begin­ning of the med­ley, but I got most of it and what there is effec­tive­ly cap­tures the feel­ing of this kind of street enter­tain­ment, com­mon in the Vic­to­ri­an and Edwar­dian eras.

‘Har­moni­pan’ Street Organ at Beamish Muse­um from Richard Elen on Vimeo.

Here’s the last of my video sequences from the Open­Tech 2009 Con­fer­ence, which I was pleased to both attend and speak at.

Women In Tech­nol­o­gy was a fas­ci­nat­ing and use­ful con­scious­ness-rais­ing ses­sion that more men should have stayed for! It was a fol­low-up to this year’s Ada Lovelace Day.

Chaired by Zoe Mar­go­lis, the pan­el con­sist­ed of Sue Black, Janet Parkin­son, Suw Char­man-Ander­son and Kathryn Kor­rick (right to left as you look at the screen). Each gave a short pre­sen­ta­tion and the ses­sion end­ed with ques­tions from the floor.

The vast major­i­ty of most of the pre­sen­ta­tions is cov­ered in this video, with the excep­tion of Kathryn Cor­rick­’s mini-work­shop (which I par­tic­i­pat­ed in and thus could­n’t eas­i­ly shoot) and a slight hic­cup when the bat­tery ran out – sub­se­quent sec­tions are hand-held as Sanyo thought­ful­ly placed the pow­er input con­nec­tor for my cam­corder so as to obscure the tri­pod sock­et. Hmph.

How­ev­er there is enough here to appre­ci­ate the major­i­ty of the content.

Women In Tech­nol­o­gy — Open­Tech 2009 from Richard Elen on Vimeo.